Product categories

PPM-T293E “1502″nti-corrosion Type Hammer Union Pressure Transmitter

Measuring medium: Acidified fracturing fluid
Output signal: 4-20mA,0-5VDC,1-5VDC,0-10VDC,2mV/V
Accuracy: 0.25%FS, 0.5%FS
Alternative Medium temperature: -40～80℃

Description

The Model PPM-T293E “1502″nti-corrosion type wing union pressure transmitters have been designed specifically for for use in the extremely harsh conditions found in on-shore and off-shore oil and gas rigs. All-welded, stainless steel construction features special stainless steel anti-corrosion materialsto isolate corrosive or abrasive drilling mediafrom sensitive intemal electronics; materials maintain strength at higher temperatures toprovide reliable performance under demanding conditions.

Specification

Tested Media	Acidified fracturing fluid
Explosion-proof Signs	Ex ib llC T4 Gb
Measuring Range	0~15000psi,20000psi
Power Supply	9-36VDC,5~12VDC
Output Signal	4-20mA, 0-5VDC, 1-5VDC, 0-10VDC, mV
Non-Linearity	0.10%FS/°C
Repeatability	0.05%FS
Combined Accuracy	0.25%FS、0.5%FSAlternative
Long-Term Stability	0.1%FS/Year（representative value）
Medium Temperature	-40～80℃
Ambient Temperature	-40～80℃
Response Time	≤1mSec（representative value）
Insulation Resistance	≥500 MΩ/100VDC
Safety overload pressure	150%FS(1.5 Times Full Range)
Rupture pressure	500%FS(5 Times Full Range)
Shock Limitation	About 10g/0～2000HZ
Impact Resistance	About 50g/1ms
Connection	Chuck type seal or specified
Wetted Materials	17-4PH stainless steel
Relative Humidity	0～100% RH
Degree of Protection	IP67
Electrical Connection	Aviation connector or directly out of line