Product categories

PPM-S322A Loader Weighing System Pressure Sensor

Output signal: 0-10mV, (0-20mV at 10VDC)
Medium temperature: -40~125ºC
Process connections: M20×1.5,M16×1.5,M14×1.5,M10×1,G1/4, or other process connections
Electrical connections: Circular connector M12 x 1, cable outlet

Description

The PPM-S322 pressure transducer has been developed for loader weighing system and it can measure pressure and temperature signals simultaneously. The model PPM-S322 pressure transducer adopts thin-film sputtering technology,and each sensor was strictly temperature compensated for both zero and span. This pressure transducer offers extremely high accuracy up to 0.1%FS. Different electrical connections are available, and it is convenient to install and configure.

Features

● Shock and vibration resistance, resistance to pressure spikes
● Resistance to high and low temperature
● High long-term stability
● High accuracy up to 0.1%FS
● Customized services are available

Specification:

Measuring medium	Gas, liquid, steam
Pressure type	Gauge pressure(G), Sealed pressure(S),Absolute pressure(A)
Pressure range	0~16Mpa…25Mpa…35Mpa…40MPa …60Mpa…100MPa
Power supply	5VDC(3-12VDC)
Output signal of pressure	0-10mV, (0-20mV at 10VDC)
Output signal of temperature	18B20
Non linearity	≤0.04% FS
Non-repeatability	≤0.02% FS
Accuracy	0.1%FS, 0.2%FS
Long-term stability	0.1%FS/year
Medium temperature	-40~125ºC
Operation temp	-40~+125ºC
Zero temp. drift	≤0.005%FS/ºC, ≤0.01%FS/ºC
FS temp. drift	≤0.008%FS/ºC, ≤0.015%FS/ºC
Response time	≤0.8ms(10%~90%)
output impedance	1500±50Ω,3300±50Ω,5500±1500Ω
Insulation resistance	≥500 MΩ/100V
Over pressure	200%FS (2 times FS)
Damage pressure	500%FS (5 times FS)
Vibration resistance	5~1000Hz
Shock resistance	50g, 20ms
Process connections	M20×1.5,M16×1.5,M14×1.5,M10×1,G1/4, or other process connections
Materials	Wetted parts: 17-4PH, 15-5PH Non-wetted parts: stainless steel 316, 1Cr18Ni9Ti
Ingress protection	IP65, IP67, IP68
Electrical connections	Circular connector M12 x 1, cable outlet